Parts

Insert the pivot peg into the base hole.

Turn the base over and slip a rubber o-ring over the bottom of the peg.

Turn the base back over and put the revolving stage over the pivot.

Prepare the backdrop with a little glue and place on top of the stage.

Prepare the figure stands by inserting the short pegs into the holes. Use a dab of glue on the back for strength, then set aside to dry.

Prepare the figures with pipe cleaners and pose the arms. When your stands are dry, attach the figures to the stand-pegs.

You're done! Decorate your stage and tell a thrilling story!